Anker AK-68ANDOCKS-BA Instruction Manual - Page 9
Browse online or download pdf Instruction Manual for Docking Station Anker AK-68ANDOCKS-BA. Anker AK-68ANDOCKS-BA 19 pages. Usb 3.0
Print Page
Please wait while Windows configures the DisplayLink Core Software. Your
2.
screen may temporarily go black or flash during this process.
3.
When finished, the installation screen will disappear, and you will be returned to
your desktop.
Note:
On some machines, you may need to reboot before being able to use your
display dock.
Hardware installation
Connect the USB display dock:
1.
Plug the USB 3.0 cable into the USB upstream connector on the back of the
display dock. A pop-up message will appear in the notification area of your
desktop indicating the completion of installation.
* Actual images will depend on your operating system. These screen shots are from Windows 7
and may vary slightly across operating systems.
2.
Connecting an Ethernet network device:
a.
Connect an Ethernet cable to the Ethernet port on the Display dock.
b.
Connect the other end of the Ethernet cable to your network hub, switch, or
router.
Connecting a DVI/HDMI monitor:
3.
For DVI ports: Use a DVI cable (not provided) to connect the DVI port to a
monitor equipped with a DVI input jack.
For HDMI ports: Use an HDMI cable (not provided) to connect the HDMI
port to a monitor equipped with an HDMI input jack.
- 6 -