anko XJ-14709C0 User Manual - Page 9
Browse online or download pdf User Manual for Kitchen Appliances anko XJ-14709C0. anko XJ-14709C0 11 pages.
Print Page
STARTING THE DEHYDRATION PROCESS
The drying temperature can be displayed both in Celsius (
1. Connect the supply cord plug (4) into a mains power outlet socket.
2. The indicator on the display on the control panel (6) will start to blink
3. Set the desired dehydration time with the plus button (9) and/or the minus button (10).
4. Push the SET button to be able to set the temperature.
5. Set the desired temperature with the plus button and/or the minus button.
6. Hold the SET button (11) down for 3 seconds to switch between Celsius (
7. Start operation by pushing the ON/OFF button (8).
The fan will turn on and warm air will flow out of the hot air vent (5).
The dehydrator will automatically switch off once the set dehydration time has elapsed.
DURING THE DEHYDRATION PROCESS
The indicator on the display will alternate every 5 seconds between the remaining dehydration time and the
dehydration temperature.
During the dehydration process, you can change the dehydration temperature and the dehydration time.
1. Push the SET button (11) when the mode you would like to change is shown. The indicator on the
display (7) will start to blink.
2. Change the dehydration time or the dehydration temperature by pushing the plus button (9) and/or the
minus button (10).
3. Wait until the indicator on the display stops blinking to save the setting.
REPLACING AND TURNING THE DRYING TRAYS
1. To ensure uniform drying, replace and turn the drying trays (2) occasionally during the dehydration
process.
2. Make sure that the drying tray without the opening in the middle is always in the topmost position.
3. As the food on the bottom trays is exposed to the hottest and driest air, move the bottom trays up and
the top trays down.
o
C) and in Fahrenheit (
o
C) and Fahrenheit (
o
F).
o
F).