anko LD-K3068 User Manual - Page 7

Browse online or download pdf User Manual for Kettle anko LD-K3068. anko LD-K3068 10 pages. Wi-fi cordless water kettle

Print Page
anko LD-K3068 User Manual
chosen temperature and may not switch OFF
automatically after boiling.
4. Fully unwind the power cord and run it through the cable guide channel on the power base.
5. Plug the mains cable into an earthed power outlet socket within easy reach.
6. The appliance can heat water to different temperatures. Each temperature key function
includes keep warm function.
7. When the appliance powers ON, all lights will blink three times, then the five temperature
key lights will be on for 30 seconds, and the appliance is in standby status. All the lights will
turn off, if no function (temperature) key is pressed within 30 seconds.
8. Press different TEMP. key to select different water temperature required. The light of the
chosen key will flash, and the appliance will start heating. When the water temperature reach
the selected water temperature, the buzzer will beep 5 times and the light will light up for 5
seconds to remind the user that the water is ready.
9. When the appliance is heating, if you want to
change it to another function, touch the other
function key directly to make the change.
10. If you wish to stop heating the water before it
reaches the chosen temperature, touch the chosen
temperature key again.
WARNING: Risk of scalding from hot water
Be sure that the water kettle is switched OFF before taking it off the power base.
11. After the water has come to a boil, wait a moment, until the water has stopped simmering.
Then remove the kettle from the power base.
12. Pour the water out slowly to avoid splashing. Do not open the lid while pouring out the
water.
* The sieve insert in the spout prevents any larger particles of scale being poured out.
* Do not re-boil stale water. Pour it away and refill with fresh water for boiling.
Keep Warm Function
1. Each TEMP. key include keep warm function. Touch the keep warm key while its light is off,
the keep warm function will be activated, and the light will light up. The keep warm function
will start from the temperature of the chosen temperature key. The flashing TEMP. key light
will light up, and it will keep warm for 40 minutes. For specific parameters for each
temperature key, refer to following list.
Parameters of each temperature
TEMP. keys