anko WK8256N User Manual - Page 5

Browse online or download pdf User Manual for Kettle anko WK8256N. anko WK8256N 6 pages.

Print Page

Cleaning

· First read the instructions in the section titled

"IMPORTANT SAFETY INSTRUCTIONS".

· Always disconnect the kettle from the mains power outlet

socket before cleaning.

· Before cleaning, make sure the kettle is cool to touch.

· Empty the kettle. Clean the exterior surface of the kettle

with a clean, damp cloth to preserve its original polished

finish. Dry and polish with a soft cloth.

· Do not use abrasive cleansers or scouring agents/pads

of any kind inside or on the exterior of the kettle.

· Open the lid, lift out the filter, rinse the filter under warm

water and brush off any impurities.

· Refit the filter and lid in reverse order.

· Only use a dry cloth to wipe the base of the kettle.

· Avoid wetting the electrical parts.

· To prevent electric shock do not immerse the kettle or

power base in water or other liquid, and make sure the

electrical parts are kept dry.

Descaling

· Half-fill the kettle with tap water and add the juice of 1

lemon to the water.

· Boil this mixture and allow it to stand for 15 minutes.

Re-boil the mixture and allow it to stand a further 15

minutes. Re-boil this mixture a third time then rinse the

kettle thoroughly.

TECHNICAL DATA

Voltage: 220-240V~ 50-60Hz

Power: 1850-2200W