Becom BE-ART-60 Installation & Operation Manual - Page 8
Browse online or download pdf Installation & Operation Manual for Kitchen Appliances Becom BE-ART-60. Becom BE-ART-60 11 pages. Twin arm kneading machine
Print Page
5. Machine description
5.1 Machine structure
The machine consists of the following main parts:
1. Mixing tank
2. Kneading arms
3. EC standard safety protection
4. Operation controls
5. Upper transmission guard cover
6. Machine unit
7. Main ON/OFF switch
8. Electric system guard cover
9. Lower transmission guard cover
10. Rear transmission guard cover
11. Pair of front feet used to stabilize the machine
5. 2 Intended use
-
This machine is designed and produced specifically to mix oven cooked products.
-
The machine is designed and produced to operate in closed environments that are protected from
atmospheric agents.
-
The machine is powered by electricity, which is converted into mechanical energy for the intended uses.
5.3 Unintended use
-
Using the machine in an explosive atmosphere.
-
Using the machine in a flammable atmosphere.
-
Using jets of water to washing the machine area where the control equipment is located.
6. Safe and correct use
6.1 Protection system
Fixed and mobile shields
All the drive units are protected by a casing
(A), fastened as indicated by the EN 953
Directive. The mixing area is protected and
cannot be accessed by the operator with the
machine running, thanks to an EC standard
protection grid (B).
6.2 Safety devices
Emergency stop
The machine is equipped with an emergency STOP button (C), located on the machine console, which allows the
operator to stop the machine in emergency cases. In addition, there is a rapid stop system (micro - D) installed
inside the protection grid rotation system, which instantly blocks the rotation of the moving parts when the grid
is raised.
© BEcom Sales (2020-02)
BE-ART
Page 7