Druck DPI 841 User Manual - Page 9

Browse online or download pdf User Manual for Test Equipment Druck DPI 841. Druck DPI 841 14 pages. Frequency calibrator and frequency loop calibrator

Print Page

Operation - Supply Hz or pulses

To supply Hz or pulses:

1. Connect the instrument (Figure 2) and, if necessary,

adjust the Set Up (Table 1).

2. Select a Hz or Pulses output task from Select Task

(Table 2/3) and, if necessary, adjust the Settings

(Table 5).

For Pulses, the display shows the time (hh:mm:ss) to

complete the count at the specified rate.

3. Supply the output values to the system (Table 7).

Pulses

Figure 2: Example configuration - To supply Hz or Pulses

Operation - Transmitter calibration

DPI 842 only. To calibrate a transmitter:

1. Connect the instrument (Figure 3/4) and, if necessary,

adjust the Set Up (Table 1).

2. Select the applicable calibration task from Select Task

(Table 2/3) and, if necessary, adjust the Settings

(Table 4/5).

3. Supply the output values to the system (Table 7).

K395 Issue 3

Pulses

Edit

Settings

Start

a) Hz

b) Pulses

Figure 3: Example configuration - Transmitter calibration

Settings

Figure 4: Example configuration - Transmitter calibration

Maximum: 30V

with external loop power

with internal loop power

Edit

Settings

Edit

Settings

[EN] English -