AirTest CN9000 Series Manual - Page 10

Browse online or download pdf Manual for Controller AirTest CN9000 Series. AirTest CN9000 Series 10 pages. Sensor controller

Print Page

AirTest Model CN9000 Basic Output Module Detail

Output Module

This standard module consists of three relays, terminal blocks, input channel selectors and relay status indicators. Relays are

Two Pole Single Throw type, with one pole NO (Normally Closed) and the other NC (Normally Closed).

This feature is no longer available unless specified at order time. The channel selection is factory set (hard

wired) as required be system specification.

The state of each relay contact is indicated by LED's on board the Output Module. An illuminated LED indicates a closed

contact.

Refer to Input/Output Wiring sheet for more detail.

Interconnect Board

The Interface Board provides the interconnection between the Input Modules, the Output Modules, custom circuit boards

and any other future modules.

Power Supply

The Power Supply provided with the CN-9000 provides power for the CN-9000. Power supply size is determined by the

requirements of the sensors and accessories that will be powered by the system.

Distributed By:

GLOBAL CONTROLS, INC.

3008-B 16TH AVE W.

SEATTLE, WA 98119

(800) 821-4863 TOLL FREE

(206) 282-4666 TEL

(206) 282-4888 FAX