Dry & Store Zephyr Operating Instructions Manual - Page 5

Browse online or download pdf Operating Instructions Manual for Hearing Aid Dry & Store Zephyr. Dry & Store Zephyr 6 pages. Dry & store zephyr hearing aid dryer operating instructions

Print Page

Physical Properties

• Outside dimensions are 5.9" x 3.6" x 2.8" (150 mm x 92 mm x 72 mm).

• The drying tray has two compartments: the forward drying area measures 3.2" x 2.6" x 1.0"

(80 mm x 65 mm x 24 mm), and a small Dry-Brik

• Weight as shipped is approximately 1 lb, 4 oz (582 g).

Power Supply

Input: 100-240 volts AC, 50/60 Hz, 1.0A max. Output: 24 VDC at 15W max. Zephyr power supplies are

interchangeable with Dry & Store

and CSA standards, and carry GS (Germany), PSE/JET (Japan), C-Tick (Australia/New Zealand), and

SABS (South Africa) certifications.

Operating Features

• A ball-bearing fan continuously circulates warm, dry air for the entire operating cycle, causing moisture

to move out of the hearing instruments by diffusion. A desiccant in the airflow path strips the moisture

out of the air, ensuring continuous dry operation.

• Zephyr will dry cerumen, making it easier to remove from the hearing instrument.

• Zephyr turns off automatically after 8 hours unless the

• Batteries do not have to be removed from hearing devices.

• Zephyr is not designed to diagnose, prevent, monitor, treat, or alleviate disease.

Rechargeable Canister Desiccant (optional)

A small number of international configurations are shipped with an optional metal canister desiccant

instead of a Dry-Brik. The protective label should be removed from both sides before use. As moisture is

adsorbed by the desiccant, the indicator will change from orange (good) to green (bad). The color change

signals that the desiccant can no longer adsorb moisture. To restore function, place the metal can in a

conventional oven for a minimum of 3 hours at a temperature of 105°-150°C (225°-300°F). The color will

change back to orange. Warning: Never place metal in a microwave oven! After recharging, allow

the hot metal can to cool before use. Best results will occur if the can is covered by a glass during the

cooling period.

compartment is in the rear of the tray.

Global models and are CE Marked. They are certified to ETL, UL,

button on the side is pressed.

off

Rev F