Dry Flush Laveo DF1045 User Manual - Page 5

Browse online or download pdf User Manual for Toilets Dry Flush Laveo DF1045. Dry Flush Laveo DF1045 15 pages. Portable toilet

Print Page

This picture shows the rear of your Laveo.

This is where you can find the various

electrical connections that are used to power

the Laveo.

The Battery Compartment is located at the

bottom of the Laveo. It is designed to give the

easiest access possible. No tools are needed to

remove the battery from the compartment.

The Charge Cable is stored in the open edge of

the Battery Compartment. Untuck the cable,

remove the plastic cap, and plug into the

supplied Battery Charger when you need to

recharge the battery.

The Power Inlet can be found above the top-right corner (Facing) the Battery Compartment.

Whether you are using the 12V Battery we supply, or the optional AC (110 volt) Power

Adapter, the Power Inlet is where you will plug in to power your Laveo.

The Power Cable plugs into the Power Inlet and supplies power from the Battery to your

Laveo.

The Battery Keeper Plate can be found below the Battery Compartment. The tab in the

middle holds the Battery in place. The Battery Keeper Plate is also one of the connecting

points for our optional Quick Floor Mount Kit.

The Rear Panel covers the Printed Circuit Board, and its connections. There isn't any need

to remove this panel, in fact we recommend you DO NOT remove the panel unless

instructed to do so by a Dry Flush Customer Support. On the outside of the panel is where

you can find the Product Label. This label also has the serial number of your Laveo printed

on it.