Anolis ArcSource Outdoor 4 MC User Instructions

Browse online or download pdf User Instructions for Light Fixture Anolis ArcSource Outdoor 4 MC. Anolis ArcSource Outdoor 4 MC 8 pages.
Also for Anolis ArcSource Outdoor 4 MC: User Instructions (8 pages)

Print Page

The Anolis ArcSource Outdoor 4 MC is an Ostar RGBW multichip based high powered multicolored LED fixture.

The unit can be used for large scale applications, as well as used for individual illuminating needs.

1.Attention

Consider the respective national norms during the installation!

Do not install the unit near naked flames.

Avoid using the unit in locations subject to possible impacts.

Do not attempt to dismantle or modify the unit.

Do not install the module in badly ventilated location

Avoid looking directly into the LED light beam at close range.

2.Installation

The ArcSource Outdoor 4 MC can be arranged in any position orientation. Three holes of diameter of 4.3mm

in the ArcSource Outdoor´s base serve for mounting on the non-flammable surface. The light head can be

adjusted against the base in range of 120°.The ArcSource Outdoor units should be connected to the ArcPower

drivers stated in technical specifications. See their user manuals for full details of mains power requirements

and DMX operation.

Avoid looking directly into the LED light beam at close range!

Use a cable splitter if more than one LED module has to be connected to the one LED output of the ArcPower

driver, the connection cable between the ArcPower and the splitter is a standard RJ45 patch cable category

5 wired 1:1.

Maximum possible number of LED modules connected to the one LED output of the ArcPower driver is men-

tioned in the table below.

ArcSource Outdoor 4 MC

The enclosed adapter stand (with M5x45 screw) allows to place light head higher:

User instructions

ArcSource Outdoor 4 MC 7°

LED RGBW

Max.number of connected

multichips

modules

CAUTION!

Compatible ArcPower drivers

ArcPower 36/K2, ArcPower 72/K2,

ArcPower 384 Rack Mount