Anolis ArcControl SU User Manual - Page 3

Browse online or download pdf User Manual for Controller Anolis ArcControl SU. Anolis ArcControl SU 6 pages.

Print Page

1. Features

•DMX stand alone controller

• Compatible with any DMX fixture or DMX LED driver

• Ready-to-use (pre-loaded with 8 scenes and 170 RGB fixtures)

• Sleek black glass design which sits 10mm from the wall

• Color palette (can also be used for scene selection)

• 12 touch-sensitive buttons. No mechanical parts

• Touch-sensitive wheel allows for accurate color selection

• Built-in flash memory for storing programs

• Up to 36 dynamic or static scenes

• 512 DMX channels. Control 170 RGB fixtures

• USB connectivity for programming and control

• 8 dry contact trigger ports

• Windows/Mac software to set dynamic colors/effects

• Programmable through the included USB cable and control software

1. Mount an electrical box inside the wall

The controller can be installed in a standard electrical

backbox. This box is usually 60mm high and wide,

except in Japan and America where it is 83.5mm/3.29

inches high. You can insert the AC/DC adapter inside or

outside the backbox.

2. Connect the wires

POWER: Connect a 5-10V 0.6A ACDC supply. Be sure to not invert the + and the ground.

DMX: Connect the DMX cable to the lighting receivers (LEDs, Dimmers, Fixtures..) (for XLR:

1=ground 2=dmx- 3=dmx+).

There are 2 ways to connect the power and DMX:

Connector block

CHECK PIN CONFIGURATIONS. APPLYING POWER TO THE DMX INPUT WILL DAMAGE THE

CONTROLLER.

ArcControl SU

RJ 45