3M 725 User Manual - Page 10

Browse online or download pdf User Manual for Monitor 3M 725. 3M 725 16 pages. Wrist strap monitor
Also for 3M 725: Instructions Manual (15 pages)

Print Page

SECTION 5

Installation Using 3M

Belt Clip 723 (Optional)

™

An optional belt clip is available to further enhance the portability feature of

the 3M

Wrist Strap Monitor Model 725. This expands the use of the monitor

™

when operators need to be highly mobile as in an electronic manufacturing

environment. Simply attach the belt clip with female snap connector to the

male snap connector on the monitor bottom cover. Slide the clip over your

belt in a convenient place, so that the wrist strap ground cord will not interfere

with normal body movements when attached to the monitor. Attach the dual

conductor ground clip to a suitable ground at the work location. During mobility,

attach the dual conductor ground clip to the parking clip on the Wrist Strap

Monitor Model 725 (See Section 6).

SECTION 6

A parking clip is supplied

with the Wrist Strap Monitor

Model 725 allowing mobile

users to silence the ground clip

disconnect alarm. Attaching the

dual conductor ground clip to the

parking clip prevents unnecessary

disconnecting/connecting of the

wrist strap ground cord from the

input jack during mobility. An

Figure 5

added benefit of this feature is that

it extends the life of the dual conductor ground cord plug and the monitor's input

jack. The parking clip is already attached to the mounting tab of the Wrist Strap

Monitor Model 725. If the Wrist Strap Monitor Model 725 is to be mounted

under a work bench for permanent use, remove the parking clip from the Wrist

Strap Monitor Model 725 using a small screwdriver.