Anova MG3514 Instruction And User's Manual - Page 10

Browse online or download pdf Instruction And User's Manual for Chainsaw Anova MG3514. Anova MG3514 19 pages.

Print Page

both hands. A firm grip will help reduce kickback and maintain control of the chainsaw. Also, make sure the area

you are cutting is clear of obstructions.

Do not reach or cut above shoulder height and use only manufacturer specified replacement bars and chains or

their equivalent.

6. FUEL AND CHAIN OIL

FUEL WITHOUT OIL (95 OCTANE UNLEADED GASOLINE).

OIL FOR 2-STROKE ENGINES.

HOW TO MIX THE FUEL?

Pre-measure the amounts of gasoline and oil to be mixed. Put some gasoline in a clean fuel container. Pour

all the oil and shake well. Pour in the rest of the gasoline and shake again for at least a minute. Place a clear

indication on the outside of the container or container to avoid mixing with gasoline or other containers.

Mixing Guide:

Gasoline (L)

2T oil (ml)

Check the area you are going to work on and the direction of the cutting object. If there is any obstacle, remove it

before turning on the machine. Never start cutting without first reviewing the work area, having made sure and

planned your path free from the danger of falling trees or the like.

Be careful and keep other people and animals out of the work area whose diameter is about 3 times the cutting

object. Inspect the machine for worn, loose, or damaged parts. Never operate a machine that is damaged,

improperly adjusted, or not fully and securely assembled.

Before starting the engine, make sure the saw chain is not in contact with anything. Keep handles dry, clean, and

free of oil or fuel mixture. Make sure the chain stops moving when the throttle control trigger is released.

8. USE AND PRECAUTIONS

Always hold the machine firmly with both hands when the engine is running. Use a firm grip with

your thumb and fingers surrounding the handles. Keep all parts of your body away from the

machine when the engine is running.

Never touch the muffler, spark plug or other metal parts of the engine while the engine is running

or immediately after stopping the engine. Doing so could cause severe burns or even electrical

shock.

■ FUEL

The engines are lubricated with an oil specially formulated for air-cooled 2-stroke

gasoline engines. If oil is not available, use an anti-rust grade added oil that is

expressly for use in air-cooled 2-stroke engines.

RECOMMENDED MIX RATIO

PETROL 40 : OIL 1

one

two

fifty

100

125