ANPVIZ NVR3216 How To Use - Page 2

Browse online or download pdf How To Use for DVR ANPVIZ NVR3216. ANPVIZ NVR3216 3 pages. How to use hk series ipc connected u series nvr

Print Page

camera again through the SADP tool. After activating the camera, connect it to the NVR POE

port.

Or you can reset the camera through the hard reset button of the camera, as shown in the figure

Remove the dome cover of the camera and find the reset button. After the camera is powered on

and started, press and hold it for about 10 seconds to reset the camera.After the camera is reset,

just activate it again through the SADP tool.

3. Camera connected to NVR

Connect the activated camera to the NVR POE interface through the network cable, wait for

about 2 minutes, after the camera is started, enter the NVR menu camera management interface,

click Refresh, the IP address of the camera will be refreshed, then click Edit for the corresponding