Daintree Contour Gen 2 Flex Installation Manual - Page 3
Browse online or download pdf Installation Manual for Lighting Equipment Daintree Contour Gen 2 Flex. Daintree Contour Gen 2 Flex 9 pages. Led lighting system
Print Page
Contour Gen 2 Flex (Side Bend)
Components and Tools Required
3
4
11
1
Contour Gen 2 Flex Side Bend Light Engine
2
GEXNFRL-1 Flex Rail or GEDSRLXX-3 Tetra SNAP Rail
3
GEXNFMC-1 Flex Mounting Clip
4
#6, #8 or #10 (M2, M3 or M4) self-drilling pan headed screws
5
#6 (M2) screws
6
Minimum 22 AWG (0.33mm
7
24 Volt power supply
8
UL approved 18 AWG (0.82mm
9
UL approved 22-14 AWG (0.33-2.08mm
10
GEXNFEC-1 Flex End Cap
11
Electrical grade silicone.
Examples of electrical grade silicone:
• Momentive RTV 6702 (white) / RTV 6708 (clear) - Silicone Rubber Adhesive Sealant
• Momentive RTV 162 (White) - Silicone Rubber Adhesive Sealant-Electrical Grade
• Dow Corning 3140 (clear) - Non-Corrosive Flowable
• Dow Corning 3145 (clear or gray) - Non-Corrosive Non-flowable
• Dow Corning RTV 748 (white) - Non-Corrosive Sealant
Optional / Required for Wet Locations
12
Weather box GEXNWB2
Optional
Contour Light Guide connector
13
Contour Light Guide 90° inside corner
14
Contour Light Guide 90° outside corner
15
Contour Light Guide 90° planar corner
16
100" (2.54 m)
1
5
6
12
13
) tie-wire
2
) supply wire
2
) twist-on wire connectors
2
95.4" (2.42 m)
7
8
14
Cutting Resolution Table
Light Engine Color
Red, Red-Orange,
Amber,Green, Blue, White
3
Installation Guide
2
9
10
15
16
Cutting Resolution
4 in. (101.6 mm)