Daintree GE current Lumination RC Series Installation Manual - Page 2

Browse online or download pdf Installation Manual for Lighting Equipment Daintree GE current Lumination RC Series. Daintree GE current Lumination RC Series 8 pages. Led luminaire

Print Page

Lumination

RC/LRC/RXLRX Series

Provided Components

The components have been properly packed to avoid damage during transit. Inspect the components to confirm there is no physical

damage. Do not install damaged components.

Fixture

Ceiling Hole

Diameter

LRXR4

4.9-5.2in

RC6/LRC6

6.4-7.2in

5.91-6.60in

RX6/

LRXR6/

LRXGR6

7.5-8.9in

RC8/LRC8

7.68-8.27in

RX8/LRXR8

LRXR10

10.2-11.0in

LRXR12

12.2-13.0in

Cut the appropriate size

hole into the ceiling tile.

Ensure frame hole diameter

matches fixture diameter.

Option A: Mount fixture by attaching hanger bars to T-Grid

ceiling (BH3 SKU 94890)

Option B: Mount fixture with 1.2" EMT conduit (not supplied)

Option A: If no holes are present on short side, use #8-1/2" self-drilling

screws

Option B: If holes are present on the short side, use the screws provided

with the frame.

Frame Installation

Place side L-brackets on existing frame

screws and tighten with screwdriver on

both sides of the frame. Then attach

mounting brackets to both L-brackets with

provided wing nuts.

Installation Guide

Adjust fixture height to be flush with ceiling and tighten

mounting bracket wing nuts.

Slide hanger bars

through adjustable

mounting brackets.