DSB 235-TP Operation Manual

Browse online or download pdf Operation Manual for Laminator DSB 235-TP. DSB 235-TP 2 pages.

Print Page

Laminator Operation Manual

Model No：235-TP

Touch panel indicator

：

Pouch indicators

Operation Procedure

Flip the support tray and wait for Green

light to start lamination.

3. Place the laminated document at the arrow

location.

Temperature indicators

Temp. Up Temp. Down

2.Insert the documents to be laminated at

center pouch location..

4. Lamination will start

automatically.

Laminator Operation Manual

Model No：235-TP

Laminating speed

300mm/min

Pouch thickness

75MIC 100MIC 125MIC

Max. width

238mm

Max. thickness

0.4mm

Dimension

369*120*95mm

CHARACTERS and FUNCTIONS:

This machine can be used to laminate pouches under COLD &HOT

conditions, in which the interlayer can be pictures, cards, document paper,

etc (with thickness less than 0.4mm). The pouches can take size up to A4

paper.

Attention:

1. Keep this machine horizontally with sufficient space for operation.

2. Please use voltage of 220V/ 50Hz during operation.

OPERATION INSTRUCTION

COLD LAMINATING

Lift back support tray，turn on the power switch, adjust the touch

panel to the position of the "Cold " and it will start laminating

automatically.

HOT LAMINATING WITH TEMPERATURE CONTROL

1. According to pouch thickness, adjust the temperature transfer switch on

the touch panel in accordingly. The indicator is red during the preheating

stage.

2. After 4~5 minutes of warming up，the indicator will turn green.

3. Put one interlayer which you want to be laminated into a folio pouch

and insert them together into the entrance of the laminator horizontally

for immediate lamination.

4. Adjust the temperature from the temperature indicator for your ideal

result.

No. of rollers

Voltage

220V

Pre-heating time

4-5min

File size

Up to A4 size

N.W.

1.5Kg