DSC PC1550 Instruction Manual - Page 7

Browse online or download pdf Instruction Manual for Security System DSC PC1550. DSC PC1550 17 pages. 4 digit master code
Also for DSC PC1550: Instruction Manual (17 pages), Instruction Manual (17 pages), Instruction Manual (9 pages), Instruction Manual (17 pages), Instruction Manual (12 pages)

Print Page

Zone Bypassing (Continued)

For security reasons, your installer may prevent the bypass command from

working on certain zones. The "Bypass" light is ON as long as ONE or more

zones are bypassed. Do not unintentionally arm the system with zones bypassed.

Zone bypasses are automatically cancelled each time the system is disarmed

and must be re-applied before the next arming.

Viewing Trouble Conditions

The PC1500/PC1550 continuously monitors a number of possible trouble

conditions. If one of these trouble conditions occur, the keypad will beep twice

every 10 seconds and the keypad "Trouble" indicator will light. Pressing any key

on the keypad will silence the sounder but the "Trouble" light will remain ON until

the trouble condition is cleared. If you cannot determine the cause of the trouble

condition, contact your installer for assistance.

To view type of trouble:

Press [ ][2] to display the type of trouble. A zone light will come on to indicate

which type of trouble exists.

Press [#] to return to Ready.

ZONE LIGHT

1 ......................... Low battery.

2 ......................... Loss of AC power ("Trouble" light will come ON,

3 ......................... Fuse open (BELL or AUX fuse).

4 ......................... Fail to communicate with monitoring station.

5 ......................... Fire loop(s) trouble.

6 ......................... Loss of time on system clock.

There are three keys on the keypad labelled [F] Fire, [A] Auxiliary and [P] Panic.

These keys are only functional if they have been programmed by your installer.

The installer should indicate which of these keys are functional by placing a

coloured label next to the key symbol on the keypad door label.

[F] Fire

Holding this key down for two seconds will sound a Fire Alarm. The alarm will

sound pulsing. The keypad will sound three beeps once the panel has accepted

the alarm. An auxiliary warning device is also activated if your installer has

connected it to your system. To silence the alarm, enter a valid access code.

[A] Auxiliary

Holding this key down for two seconds activates this function if your installer has

programmed it. There is no audible alarm and no lights on the keypad will come

on. When the panel has accepted the alarm, the keypad will sound a series of

beeps. An auxiliary warning device is activated ONLY IF connected to your

system by your installer.

TYPE OF TROUBLE

but keypad buzzer will not sound).