DSC PK5500 Instruction Manual - Page 8
Browse online or download pdf Instruction Manual for Security System DSC PK5500. DSC PK5500 20 pages. Power series
Also for DSC PK5500: Installation Instructions Manual (9 pages), Installation Instructions Manual (8 pages), Installation Instructions Manual (16 pages)
Intrusion (Burglary) Alarm Continuous Siren
I
f you are unsure of the source of the alarm approach with caution! If the alarm
was accidental, enter your Access Code to silence the alarm. Call your central sta-
tion to avoid a dispatch.
Fire Alarm Pulsed Siren
Follow your emergency evacuation plan immediately!
If the fire alarm was accidental (i.e. burned toast, bathroom steam, etc.), enter your Access Code to
silence the alarm. Call your central station to avoid a dispatch. Ask your alarm company if your sys-
tem has been equipped with fire detection. To reset the detectors, see the Sensor Reset section.
Time & Date Programming
Press
, plus your Master Access Code or press the time programming function key (pro-
grammed by your installer), or if you have a Time and Date trouble, pressing 8 from within the trou-
ble menu. Press
When using the PK5500/RFK5500, use the
to select. Enter the time in 24-hr format (HH:MM), followed by the date (MM:DD:YY). Press
exit programming.
NOTE: If you have an LCD keypad, your installer may have programmed your system to display
the time and date while the keypad is idle. If this is the case, you can press the
date and time display.
Bypassing Zones
Use the zone bypassing feature when you need access to a protected area while the system is armed,
or when a zone is temporarily out of service, but you need to arm the system. Bypassed zones will
not be able to sound an alarm. Bypassing zones reduces the level of security. If you are bypassing a
zone because it is not working, call a service technician immediately so that the problem can be
resolved and your system returned to proper working order. Ensure that no zones are unintentionally
bypassed when arming your system. Zones cannot be bypassed once the system is armed. Bypassed
zones are automatically cancelled each time the system is disarmed and must be bypassed again, if
required, before the next arming.
NOTE: 24 hour zones can only be unbypassed manually.
NOTE: For security reasons, your installer has programmed the system to prevent you from bypass-
ing certain zones (e.g., smoke detectors).
Bypassing Zones with a PK5500/RFK5500
Start with disarming the system.
to enter the function menu. The keypad will display "Press , for < > Zone Bypass".
1. Press
2. Press
or
Zone Name".
3. Enter the two-digit number of the zone(s) to be bypassed (01-32).
You can also use the
zone. The keypad will display "Zone Search < > "Zone Name?". "B" will appear on the display to show
that the zone is bypassed. If a zone is open (e.g., door with door contact is open), the keypawill display
"Zone Search < > "Zone Name" O". If you bypass the open zone, a "B" will replace the "O".
4. To unbypass a zone, enter the two-digit number of the zone(s) to be bypassed (01-32). You can
also use the
will disappear from the display to show that the zone is no longer bypassed.
5. To exit bypassing mode and return to the Ready state, press
to select Time and Date.
, then your [access code] (if required). The keypad will display "Zone Search < >
keys to find the zone to be bypassed, and then press
keys to find the zone, and then press
scroll keys to find the menu option and press
6
key to clear the
to select the
to select the zone. The "B"
.
to