ANSI PALOMA User Instructions - Page 4

Browse online or download pdf User Instructions for Safety Equipment ANSI PALOMA. ANSI PALOMA 16 pages. Full body harness

Print Page

Warning

Current User Instructions must always be available to the user.
n
Read and understand this instructions before using this equipment.
n
This User Instructions is not to be removed except by the user of this equipment.
n
Do not throw away this instructions.
n
Do not alter this equipment without manufacturer's authorization.
n
Do not misuse this equipment.
n
Failure to follow all instructions and limitations on the use of this equipment may result in serious injury or death.
n
Prior to each use, inspect all personal fall arrest system equipment for wear, damage, and other deterioration.
n
Defective components must be removed from service immediately.
Thoroughly evaluate and plan all elements of your fall protection systems before using your equipment. Make sure
n
that your systems are appropriate for your needs and facility. Also be sure to calculate fall clearance and swing fall
clearance.
Users must have a rescue plan and the means to implement it. This plan must provide prompt employee rescue or
n
assure that employees have the ability to rescue themselves in the event of a fall.
Store this equipment in a cool, dry, and clean environment that is out of direct sunlight when not in use.
n
After a fall occurs, this equipment must be removed from service and destroyed immediately. Before each use, need
n
inspection of load indicators.
Failure to follow all instructions and limitations on the use of Personal Shock Absorbers and Shock Absorbing
n
Lanyards may result in serious personal injury or death.
Failure to have the leg straps of the Full Body Harness properly adjusted in the event of a fall arrest may result in
n
serious personal injury or death.
Never attach the unused leg of the lanyard back to the Full Body Harness anywhere other than an approved lanyard
n
storage keeper.
To minimize the potential for accidental disengagement, a Competent Person must ensure system compatibility.
n
All equipment must be inspected before each use according to the instructions found in this User Instructions. All
n
equipment should be inspected by a qualified person on a regular basis.
Never use fall protection equipment for purposes other than those for which it was designed.
n
Environmental hazards should be considered when selecting fall protection equipment.
n
Do not expose the equipment to chemicals, heat, flames or other environmental conditions, which may produce a
n
harmful effect. Consult PALOMA in cases of doubt.
Never remove product labels because they include important information for the Authorized Person/User.
n
Only the equipment manufacturer, or person authorized in writing by the manufacturer, make repairs to equipment.
n
Do not expose equipment to environmental hazards and chemicals which may produce a harmful effect. Polyester
n
should be used in certain chemical or acidic environments.
Do not using combinations of components or sub-systems, or both, which may affect or interfere with the safe
n
function of each other.
When use the harness please follow the user instructions and take the proper method of use, and follow the
n
limitations of the equipment.
Do not allow equipment to come in contact with anything that will damage it including (but not limited to): sharp
n
edges, abrasive surfaces, moving machinery, or high-temperature applications like welding, heat sources, and
electrical hazards.
4
Rev.C1 of 210602