DAITEM 145-21X Installation Manual - Page 11

Browse online or download pdf Installation Manual for Security Sensors DAITEM 145-21X. DAITEM 145-21X 19 pages. Outdoor motion detector 2 x 12 m

Print Page

7.2 Horizontal adjustment of the detection angle

If there is an obstacle in the way of the

detection beams, they can be horizontally

offset by 3°.

IMPORTANT: because an alarm is triggered

when both the upper and lower beams are

broken at the same time, the detection angle

of both must be horizontally adjusted. Set the

sensitivity setting to H in this case (see

Adjustment of the sensitivity).

Before detection angle adjustment

Range of detection

After detection angle adjustment

3°

Range of detection

To adjust the detection angle:

1. Separate the support from lens and the cover (see

2. Adjust the detection angles separately by sliding t he lenses horizontally.

12 m

0,6 m

3. Position the lens support back in place (see 3.Range of detection).

When the lenses are at the right-hand

end stop, the detection angle is 0°.

1.Range of detection).

When the lenses are not at the right-hand

end stop, the detection angle is offset from

the wall by 3°.