3M Litmann Quality 3100 Instructions Manual - Page 14
Browse online or download pdf Instructions Manual for Medical Equipment 3M Litmann Quality 3100. 3M Litmann Quality 3100 16 pages. Mining cable splice kit
Also for 3M Litmann Quality 3100: Quick Start Manual (2 pages)
Print Page
11.4
Start 2" (50 mm) beyond Scotch
one half-lapped layer of Scotch
toward the cable extending 2" (50 mm) beyond the 130C tape on the opposite
end. Always wrap the 31 tape toward the machine end of the cable.
Start taping here
2" (50 mm)
past end of
previous layer
11.5
Starting 1" (25 mm) past the 31 tape, apply 3 half-lapped layers of 3M
Temflex
™
ends of the 31 tape until the tape reaches full bond.
1"
(25 mm)
12.0 For Conduit Repair and Splicing
12.1
If splicing, cut conduit at 30–45° angle.
12.2
Clean and abrade conduit surface.
12.3
Fill voids using 130C tape.
Electrical Vinyl Tape 1700P to each end to temporarily secure the
3M
Temflex
™
Linerless Rubber Splicing Tape 130C, wrap
®
Heavy Duty Mining Tape 31 with mastic side
®
Scotch
Heavy Duty Mining Tape 31
®
(Mastic side toward cable)
Figure 26
Vinyl Electrical Tape 1700P
™
Figure 27
Figure 28
14
Machine End
1"
(25 mm)
30–45°
2" (50 mm)
past end of
previous layer
™
78-8127-6830-3-C