ansio MINI Instructions And Operating Manual - Page 4

Browse online or download pdf Instructions And Operating Manual for Dehumidifier ansio MINI. ansio MINI 8 pages.

Print Page

IMPORTANT NOTE ON PERFORMANCE

The dehumidification capacity is impacted by the room operating

parameters, temperature, humidity, size and whether the windows/doors

are open. For optimal results, make sure that the room parameters are

within the operating range of the appliance.

SWITCHING ON

1. Remove the power adapter from the box. Connect it to both the

dehumidifier and the main wall socket.

2. Switch the dehumidifier ON using the ON/OFF button. The green LED

will illuminate. You will also feel a light breeze blowing out of the dry

air outlet.

3. To switch OFF, press the ON/OFF button again.

REMOVING THE WATER TANK

The dehumidifier can collect up to approximately 250ml (9oz) of water per

day, assuming that the temperature is about 30°C (86°F) and Relative

Humidity RH 80%.

When the tank is full, the LED will turn YELLOW and the unit will turn OFF.

When the tank is full, turn OFF the dehumidifier and simply pull the water

tank out gently. Empty the water tank via the water displacement hole

after pulling out the rubber plug. After emptying, put the rubber plug back

on and carefully install the tank back in before turning the dehumidifier

ON.

Contact Customer Support – 0800 080 6781 (UK Toll Free) or +44 207 157 9795

ANSIO 1535 (Dec'20)