Anslut 002518 Operating Instructions Manual - Page 12
Browse online or download pdf Operating Instructions Manual for Lighting Equipment Anslut 002518. Anslut 002518 12 pages. Rechargeable led torch
Print Page
EN
Rechargeable battery
Battery technique
Battery capacity
Charging time
DESCRIPTION
1.
Torch
2.
Strap
3.
Battery holder for AAA 1.5 V
4.
Rechargeable battery 2000 mAh
5.
Charging cable
6.
Adapter
FIG. 1
1.
Change the luminous flux
2.
Off/on
3.
Connection for charging
FIG. 2
USE
BATTERY
1.
You need to choose the type battery
you intend to use before you switch
on the torch.
1. Battery holder for 3xAAA, 1.5V.
2. Rechargeable battery, 2000 mAh.
3. Lid
2.
To charge the battery, unscrew the cover.
Insert the selected battery and refit the
cover.
FIG. 3
3.
Ensure that the batteries are inserted
in the correct direction, positive and
negative terminals.
FIG. 4
12
Li-Ion
3.7 V / 2000 mAh
2.5 hours
Rechargeable battery
In order to connect the charging cable, screw
down the protection to access the input.
FIG. 5
IMPORTANT:
You must ensure that you have inserted
a rechargeable battery before you start
charging.
TORCH
The torch as 4 different luminous flux settings,
you access these with the off/on button.
Depending on the number of times you press
the button you set the following:
1.
Start the lamp with 100% luminous flux.
2.
50 % luminous flux.
3.
30 % luminous flux.
4.
Fast flashing
5.
SOS flashing
6.
Switch off the torch.
Press and hold the off/on button for two
seconds to turn off the torch without going
through the four luminous flux settings.
Light beam
The torch offers four different types of light
modes to choose from. Adjust by turning the
torch head.
FIG. 6