Anslut 006148 Operating Instructions Manual - Page 11
Browse online or download pdf Operating Instructions Manual for Lighting Equipment Anslut 006148. Anslut 006148 11 pages. Bulkhead light
Print Page
5.
Put the protective sleeves on the wires in
the power cord. Make sure that they cover
the wires.
6.
Connect the wires to the terminal block on
the light.
7.
Screw in the light source.
8.
Fit the glass and the grille.
MAINTENANCE
IMPORTANT:
Make sure that the light is not connected to
the mains when cleaning or replacing the
light source.
REPLACING THE LIGHT SOURCE
1.
Make sure the mains supply is
disconnected.
2.
Release the grille and glass.
3.
Unscrew the old light source. Make sure
that it has cooled first.
4.
Screw in the new light source.
5.
Fit the glass and the grille.
EN
11