FOXFURY 940K-010RSC Product Manual - Page 4

Browse online or download pdf Product Manual for Flashlight FOXFURY 940K-010RSC. FOXFURY 940K-010RSC 7 pages. Sideslide series

Print Page
INSERTING AND REMOVING THE
SIDESLIDE FROM THE HOLDER
The flashlight is easily securable and removable by using the unique SideSlide
Release Lever.
TO INSERT THE FLASHLIGHT INTO THE HOLDER:
1
1.
Insert the flashlight by pushing it into the beveled opening on the front of
the Holder.
2.
Once locked, the Release Lever falls into a groove on the handle, securing
the flashlight in place.
TO REMOVE THE FLASHLIGHT FROM THE HOLDER:
2
1
1.
Press and hold the Release Lever.
2.
While keeping the Release Lever pressed, pull flashlight out of the Holder.
6
2
INSTALLATION OF YOUR
SIDESLIDE MOUNT
SIDESLIDE C-CLAMP
The C-Clamp can be mounted on the right or left side of the helmet, above or
below the brim (based on user preference).
TO MOUNT ON THE RIGHT SIDE OF A HELMET:
Place mount on helmet at desired location and tighten thumbscrews.
TO MOUNT ON THE LEFT SIDE OF A HELMET:
There are two (2) screws which allow you to separate the C-Clamp from the
Holder and flip it 180° so that it can be worn on the left side of a helmet.
1
2
1.
Using a 2 mm AF Hex Key* twist the screws counter-clockwise to remove.
2.
Pull C-Clamp mount away from Holder.
3.
Spin C-Clamp mount 180°.
4.
Align holes on the C-Clamp mount with holes on the Holder. Re-insert
screws and tighten with Hex Key , turning clockwise until secured.
OPTIONAL TIP: Apply Loctite
™
*2 mm AF Hex Key not included
3
4
as needed to secure screws.
7