DSC LCD5501Z Installation Instructions Manual - Page 5
Browse online or download pdf Installation Instructions Manual for Keypad DSC LCD5501Z. DSC LCD5501Z 12 pages. Dsc keypad
Also for DSC LCD5501Z: Using (4 pages)
Print Page
Programming the Keypad
There are several programming options avail-
able for the LCD5501Z keypad. These are
described below. Record all your programming
choices in the programming worksheets in-
cluded in this manual.
Programming the LCD5501Z is similar to program-
ming the rest of the system. When you are in the
LCD5501Z programming sections, the keypad will
display which options are turned on along the top
of the display. To turn an option on or off, press the
number corresponding to the option on the
number pad. The numbers of the options that are
currently turned ON will be displayed.
For example, if options 1 and 2 are on, the
display will look like:
For information on programming the rest of your
security system, please refer to your system's
Installation Manual .
Function Key Options
The function keys are programed in sections [1]
to [5]. By default, the 5 function keys on the
keypad are programmed as Stay Arm (03), Away
Arm (04), Chime (06), Sensor Reset (14) and
Quick Exit (16). You can change the function of
each key on every keypad. Please see your
system's Installation Manual for instructions on
programming the keys, and a complete list of all
the function key options available for your system.
Clock Options
The LCD5501Z will display the current time after
30 seconds of no key presses. To set the correct
time and date for the system, please refer to
your system's Instruction Manual . You can
change how the keypad displays the time with
the following options. To change the clock
options:
1. Enter [*][8][Installer's code]
2. Enter [000] to go to keypad programming
3. Enter section [6] to go to clock options.
4. To turn any of the options on or off, press [1],
[2], or [3]:
NOTE: If the Time does not display on keypad
option is selected, make sure that the Keypad
displays time when zones are open option is also
selected.
[1] ON =
Time displays on keypad
OFF = Time does not display on
keypad
[2] ON =
Clock display is in AM/PM format
(e.g. 08:00 AM)
OFF = Clock display is in 24-hour
format (e.g. 20:00)
[3] ON =
Keypad does not display time
when zones are open
OFF = Keypad displays time when
zones are open
5. When you are finished programming the clock
options, press [#] to exit.
5