DSC ALEXOR PC9155 Quick Start Installation Manual - Page 2

Browse online or download pdf Quick Start Installation Manual for Control Panel DSC ALEXOR PC9155. DSC ALEXOR PC9155 2 pages. Wireless panel & keypad

Print Page

5. Power Up the WT5500 Keypad

Remove the mounting bracket from the keypad and insert batteries.

6. Enroll the Keypad and Wireless Devices into the Panel

Press star (*) and 1 to enroll. This must take place within the first two minutes of

powering up ALEXOR. Keypad will display "WFKP Enrollment Successful"message.

To enroll wireless devices, use the quick enroll feature found within installers

programming section [898].

7. Mount the Keypad onto the Wall

Using the screws provided, mount the keypad bracket onto the wall.

Set keypad onto the wall bracket and snap into place.

8. Program ALEXOR

Perform template programming found in section [899]. Enter the 4 digit code which

represents the functions required for basic operation through template programming.

Code prompts exist for pre-defined zone definitions, reporting code formats,

communication call directions, and DLS setup. Once all codes have been programmed,

you will be prompted to enter the monitoring station phone number and account code,

DLS access code, entry and exit delays, and installer code.

9. Perform Placement Testing

The proposed placement of each wireless device should be tested before it is mounted

by entering section [904]-[906]. Testing the signal strength between ALEXOR and

wireless devices can be accomplished in a group (global placement test) or individually.

Installation Complete!

PA N E L S, K E Y PA D S & M O D U L E S

Quick-Start Installation Guide

Wireless Panel & WT5500 Keypad

For product information

www.dsc.com

Product specifications and availability subject to

change without notice. Certain product names

mentioned herein may be trade names and/or

registered trademarks of other companies.