Foxfury Lighting Solutions 85-023 Quick Start Manual-Setup

Browse online or download pdf Quick Start Manual-Setup for Drone & Quadcopter Accessories Foxfury Lighting Solutions 85-023. Foxfury Lighting Solutions 85-023 2 pages. Drone mounts for yuneec h520 & typhoon h (set of 2)

Print Page

QUICK START GUIDE

RUGO DRONE MOUNTS

FOR YUNEEC H520 & TYPHOON H (SET OF 2)

P/N 85-023

HOW TO ATTACH MOUNTS

Start by matching the correct side of the

RUGO to the Drone Mount, making sure the

metal tab of the RUGO fits into the Drone

Mount notch.

Use the (2) two thumb screws to attach the

RUGO to the Drone Mount.

To attach the Drone Mount to the Yuneec

Typhoon Drone, position the open side of the

mount against one of the landing gear legs

and rotate clock-wise until the Mount snaps

into a vertical postition

Rotate the Mount 180° on the drone landing

gear leg so that the Rugo light sits inboard

of the drone landing gear (between leg and

camera).

Slide the Drone Mount down the drone leg

until it stops.

Repeat for both sides.

Reverse these steps to remove the Drone

Mounts

WHAT'S INCLUDED:

(2) RUGO Drone Mounts

(2) Thumb Screws

GENERAL MAINTENANCE TIPS

As needed, wash your FoxFury Rugo Drone

Mounts using a soft washcloth, clean water

and a mild soap. When done, pat dry with a

soft cloth.

4-5

4/2018