Foxfury Lighting Solutions 85-027 Quick Start Manual-Setup

Browse online or download pdf Quick Start Manual-Setup for Drone & Quadcopter Accessories Foxfury Lighting Solutions 85-027. Foxfury Lighting Solutions 85-027 2 pages. Drone mounts for dji phantom 4 (set of 2)

Print Page

QUICK START GUIDE

RUGO DRONE MOUNTS

FOR DJI PHANTOM 4 (SET OF 2)

P/N 85-027

HOW TO ATTACH MOUNTS

Start by matching the correct side of the

RUGO to the Drone Mount, making sure

the metal tab of the RUGO fits into the

Drone Mount notch.

Use the (2) two thumb screws to attach

the RUGO to the Drone Mount.

To attach the Drone Mount to the

Phantom 4 Drone, position both sides

of the mount on the drone landing gear

skid legs, rotate down to snap the Drone

Mount arms around the landing gear skid

legs. Slide the Drone Mount down the

landing gear skid legs until the bottom

arm of the Drone Mount snaps onto the

bottom of the landing gear skid leg.

Repeat on both sides.

Reverse these steps to remove the Drone

Mounts

WHAT'S INCLUDED:

(2) RUGO Drone Mounts

(2) Thumb Screws

GENERAL MAINTENANCE TIPS

As needed, wash the FoxFury Drone

Mounts using a soft washcloth, clean

water and a mild soap. When done, pat

dry with a soft cloth.

4/2018