Daiwa Orbit Massage Lounger ORBT-1 Operating Instructions Manual - Page 11
Browse online or download pdf Operating Instructions Manual for Massager Daiwa Orbit Massage Lounger ORBT-1. Daiwa Orbit Massage Lounger ORBT-1 12 pages.
Print Page
TROUBLE SHOOTING
No.
Problem
Check the following:
Noises are heard
during operation
Has the power plug
slipped out of the wall
Operation fails to
outlet?
start
Is the power switch in the
"off" position? Has the
fuse blown out?
Airbags within the
Are the air tubes
seat and the footrests
blocked?
fail to work properly
Airbags within the
The massage chair has
seat and the footrests
detected some error that
fail to work properly
it is unable to display.
If you encounter problems operating the Orbit, please check the points above to see if they
can be rectified. If the Orbit still malfunctions or does not work, please turn off the chair
and remove the power plug from the electrical outlet. Contact Daiwa Repair Service at
833-542-1918 or at daiwamassage.com for assistance.
IMPORTANT
Do not dismantle or attempt to repair the chair yourself. Doing so will void the
warranty and U.S. Jaclean/Daiwa will not bear any responsibility for any subsequent
consequences.
Explanations / Remedies
These noises are normal and
arise from friction between
N/A
the massage rollers and the
leather cover.
Connect the power plug
securely to the wall outlet.
Switch power to the "on"
position. Replace the fuse
with another of the same
type.
Clean out the air tubes.
Turn off power, then turn it on
again. If the problem
persists, disconnect the
power plug from the wall
outlet and contact an
authorized repairman
TECHNICAL SPECIFICATIONS
Product name: Orbit Massage Lounger
Product Model: ORBT-1
Rated voltage: 110-120 V~
Rated frequency: 60 Hz
Rated power: 1.1 A
Safety design: Class I