Daiwa Orbit Massage Lounger ORBT-1 Operating Instructions Manual - Page 8
Browse online or download pdf Operating Instructions Manual for Massager Daiwa Orbit Massage Lounger ORBT-1. Daiwa Orbit Massage Lounger ORBT-1 12 pages.
Print Page
SETUP
Attach the corresponding connectors to the ports located on the back of the footrest.
Air valve
Electrical port
4. Installing all other units
Connect the controller to its
corresponding port on the power supply
box. Insert the power plug of the chair
into a wall outlet, then turn on power to
return the chair's backrest to its upright
position.
Controller
After all parts assembled, please insert the power cord into the power socket, and
then turn on the switch. Press the power on the remote control to start massage.
Airtube
Electrical plug
Power On/Off
Power cord
Controller plug
SETUP
INITIAL OPERATION
Make sure there are no objects, people, or pets in the vicinity of the unit.
Check that the chair has room to recline. Use the controller to lower the backrest to its
furthest outstretched position. Raise the footrest to its highest position. Make sure
that sufficient open space surrounds the chair on all sides. Make sure that the leg
rest is properly connected to the main part of the chair.
Return the chair to its original, upright position.
CAUTION
Do not sit on the massage chair while the footrest is rising.
To avoid possible damage, do not suddenly load the footrest with heavy weight.
Do not allow children to play with this massage chair. If controls are tampered
with, accident or injury arising from the power supply box may result.
After your massage finishes its cycle, switch off power and remove the power plug
from its wall outlet.
Avoid operating this chair during rain and thunderstorms.
When the chair is not in use, switch off power and remove the power plug from its
wall outlet.
If you do not plan to use the chair for an extended period of time, please put it
into storage.
Avoid dragging this chair across surfaces that can easily be damaged, such as
wooden or carpeted flooring.
To prevent electric shock, do not operate this chair within damp environments.
Do not place this chair near a stove or other significant sources of heat. Do not
expose the chair to prolonged sunlight. Damage to its leather cover may result.
Do not hold the footrest massage section when moving the unit. If this is not
observed, the section may slide as you move the unit, and injuries may occur.
Do not drag or push the unit in an installed state. Protect your floor (place a mat
or similar) when moving the unit on its wheels to avoid damage to your floor.