FoxGate S6224-S2 Installation Manual - Page 11
Browse online or download pdf Installation Manual for Switch FoxGate S6224-S2. FoxGate S6224-S2 16 pages.
Print Page
FoxGate S6200 Series Installation Guide
with the electronic equipment or lightning protection devices.
Keep away from high power radio transmitters, radar transmitters, and high
frequency strong circuit devices.
Provide electromagnetic shielding if necessary.
2.1.1.6 Rack Configuration
The dimensions of the FoxGate S6224-S2/S4 series are designed to be mounted on
a standard 19'' rack, FoxGate S6224-S2/S4's dimensions are 440mm x 44mm x 229mm
(W x H x D). Please ensure good ventilation for the rack.
Every device in the rack will generate heat during operation, therefore vent and fans
must be provided for an enclosed rack, and devices should not be stacked closely.
When mounting devices in an open rack, care should be taken to prevent the rack
frame from obstructing the switch ventilation openings. Be sure to check the
positioning of the switch after installation to avoid the aforementioned.
Caution！
If a standard 19'' rack is not available, the FoxGate S6224-S2/S4 series can be
placed on a clean level desktop, leave a clearance of 10mm around the switch for
ventilation, and do not place anything on top of the switch.
Installation Notice
2.1.2
Read through the installation instruction carefully before operating on the system.
Make sure the installation materials and tools are prepared. And make sure the
installation site is well prepared.
During the installation, users must use the brackets and screws provided in the
accessory kit. Users should use the proper tools to perform the installation. Users
should always wear antistatic uniform and ESD wrist straps. Users should use
standard cables and connecters.
After the installation, users should clean the site. Before powering on the switch,
users should ensure the switch is well grounded. Users should maintain the switch
regularly to extend the lifespan of the switch.
Chapter 2 Hardware Installation
4