ANSMANN 990-00126 User Manual - Page 4

Browse online or download pdf User Manual for Work Light ANSMANN 990-00126. ANSMANN 990-00126 15 pages. Led-ball-worklight

Print Page
GB
OPERATING INSTRUCTIONS
SAFETY - EXPLANATION OF NOTES
Please take note of the following symbols and words
used in the operating instructions, on the product and on
the packaging:
= Information | Useful additional information
about the product
= Note | The note warns you of possible
damage of all kinds
= Caution | Attention - Hazard can lead to injuries
= Warning | Attention – Danger!
May result in serious injury or death
PROPER INTENDED USE
The product serves as a mobile light source and is not
intended for use in other applications. The product is
intended exclusively for private, household use and is not
suitable for commercial use or for household room light-
ing and is only for use as described in the operating inst-
ructions. Use outside that stipulated in the information is
improper use and this can result in damage to property or
personal injury. We accept no liability for damage caused
by incorrect or improper use.
GENERAL SAFETY
INSTRUCTIONS
This product may be used by
children from the age of 8 and by
persons with reduced physical,
sensory or mental abilities or lack
of experience and knowledge, if
they have been instructed on the
safe use of the product and are
aware of the hazards. Children
are not permitted to play with the
product. Children are not permit-
ted to carry out cleaning or care
without supervision.
Keep the product and the packa-
ging away from children. This pro-
duct is not a toy. Children should
be supervised in order to ensure
that they do not play with the
product or packaging.
Avoid eye injuries - Never look
directly into the beam of light or
shine it into other people's faces.
Deutsch |
English
| Français | Español | Português | Svenska
Italiano | Nederlands | Dansk | Suomi | Norsk
If this occurs for too long, the
blue light portion of the beam
can cause retinal damage.
Never touch a device that is
connected to the mains with
wet hands, or if it has fallen into
water. In this case, first switch
off the house circuit breaker and
then pull out the mains plug.
Do not expose to potentially ex-
plosive environments where there
are flammable liquids, dusts or
gases.
Never submerge the product in
water or other liquids.
Use only an easily accessible
mains socket so that the product
can be quickly disconnected from
the mains in the event of a fault.
All illuminated objects must be at
least 10cm away from the lamp.
Use the product exclusively with
the accessories included with it.
DANGER OF FIRE AND
EXPLOSION
Do not use while still in the pa-
ckaging.
Do not cover the product - risk of
fire.
Never expose the product to ex-
treme conditions, such as extre-
me heat/cold etc.
Do not use in the rain or in damp
areas.
GENERAL INFORMATION
ƒ Do not throw or drop
ƒ The LED cover cannot be replaced. If the cover is
damaged, the product must be disposed of.
ƒ The LED light source cannot be replaced. If the LED has
reached the end of its service life, the complete lamp must
be replaced.
ƒ Do not open or modify the product! Repair work shall only be
carried out by the manufacturer or by a service technician
appointed by the manufacturer or by a similarly qualified
person.
ƒ Disconnect the device from the power supply only by
pulling on the plug or plug housing, never on the cable.
ƒ Information for the light and mains adapter as well as
mains voltage on the socket must match with the type
plate.
ƒ The lamp shall not be placed face-down or allowed to
topple face-down.
CLEANING | OPERATION
Before cleaning the light, disconnect the mains plug and
allow the spotlight to cool down sufficiently. Clean with
a dry or slightly damp, clean, lint-free cloth. Before each
use, check the plug, mains cable and housing of the lamp
for damage. If the lens is damaged, it must be replaced
immediately. Clean any dirt from the housing or lens
immediately as this may cause overheating.
ENVIRONMENTAL INFORMATION DISPOSAL
Dispose of packaging after sorting by material type.
Cardboard and cardboard to the waste paper, film to
the recycling collection.
Dispose of the unusable product in accordance with
legal provisions. The „waste bin" symbol indicates
that, in the EU, it is not permitted to dispose of elect-
rical equipment in household waste.
For disposal, pass the product on to a specialist
disposal point for old equipment, use the return and
collection systems in your area or contact the dealer
from whom you purchased the product.
Improper disposal may result in toxic ingredients
being released into the environment, which may
have adverse health effects on humans, animals and
plants.
In this way you will fulfil your legal obligations and
contribute to environmental protection.
PRODUCT DESCRIPTION
1. Carry handle
2. Cable winder
3. On/off switch
4. Integrated socket with protective cover
5. Base
6. Mains plug
7. Protective cover
8. Integrated hanging hook
FIRST USE / OPERATION
Plug the mains plug in to a mains power outlet. The on/
off switch is on the side of the housing.
The lamp shall be set down only on stable and non-slip
surfaces that are as close to horizontal as possible.
When placing it on slight inclines ensure that the lamp
cannot topple over.
Deutsch |
English
| Français | Español | Português | Svenska
Italiano | Nederlands | Dansk | Suomi | Norsk
HOLDING DEVICES (HOOKS, STAND, ETC.)
If the light is the to be fastened with a holding device,
ensure that the holding device is firmly/properly fastened
in place. Observe max. mounting height! (Stand and
fastening materials not included).
INTEGRATED SOCKETS
Do not connect devices with a combined power rating
over 3000W (total output power for the socket) to the
integrated socket. IPX4 is only assured when an IPX4 plug
is connected to the device socket or the cover of the
socket is closed.
The product complies with the requirements from the
EU directives.
Subject to technical changes. We assume no liability for printing errors.