Foxpro SNOWPRO Instruction Manual - Page 7

Browse online or download pdf Instruction Manual for Speakers Foxpro SNOWPRO. Foxpro SNOWPRO 20 pages.

Print Page

8. The lanyard loop is located on the bottom of the TX433.

9. The User 1 button is located to the left of the Mute button.

10. The Volume Up and Volume Down buttons are located to the

left and right of the large button in the middle.

11. The Play/Select button is the largest button in the middle of the

TX433.

12. The Power button is located on the upper left of the keypad.

13. The Battery Level Indicator is located to the left of the elapsed

timer on the screen.

14. The Mute Status Indicator is located to the left of the Battery

Level Indicator.

15. The Volume Level Indicator is located to the left of the Mute

Status Indicator.

16. The antenna is located on the top left of the TX433.

1-2 Snow Pro Requirements

The SnowPro comes with an 11.1V Lithium battery pack and charger. It

is recommended to charge the battery pack before using it to ensure

the pack is fully charged.

To install the battery pack, open the caller's case. Connect the battery

pack to the caller's power wire by connecting the white connectors.

Place the battery pack inside the cavity where the power wire comes

out.

The TX433 remote control operates on a single 9V battery. It is

recommended that you use a high-quality lithium or alkaline battery for

the best performance

compartment by removing the battery compartment door from the

back of the TX433. The door slides down and off the remote. Insert the

9V battery in the back of the remote. Slide the battery compartment

door back onto the remote. Push and hold the power button on the

To install the 9V battery, access the battery