Foxpro Cabela's SLP Predator Call Instruction Manual - Page 10

Browse online or download pdf Instruction Manual for Hunting Equipment Foxpro Cabela's SLP Predator Call. Foxpro Cabela's SLP Predator Call 12 pages. Predator caller

Print Page
You can now connect the Cabela's SL
compartment. You will need to obtain the appropriate USB cable (USB 2.0 printer-style cable) as one is not
included with the product. Make sure that the game call is turned off prior to connecting it to your PC.
After connecting the game call to your PC, the utility should recognize the device as being a valid product
and display "Connected to..." followed by the device name. The "Caller Sound Files" column should become
active and display the sounds currently installed. It will then ask you if you wish to back up your sounds. You
can take this time to do so, if you wish.
Understanding File Locations & Source Sound Library
After launching the utility, it will create a folder named 'FOXPRO' inside of your Documents folder. Inside of
the 'FOXPRO' folder is two additional subfolders: 'Backup' and 'Sounds'. The 'Sounds' folder is the source
for the 'Source Sound Files' column in the programming utility. Always store new sound files in this 'Sounds'
folder so that you can easily access them through the programming utility.
The Programming Process
1.
Turn off the Cabela's SL
2.
Connect the Cabela's SL
3.
Launch the programming utility.
4.
If you do not see your new sounds under the "Source Sound Files" column, use the "Browse
Library" button to navigate to the correct location. When the appropriate files are found,
double-click on any of the sounds to automatically load all files from that location.
5.
Select one, multiple, or all sound files in the "Source Sound Files" column.
6.
Click on the position you wish to insert the sounds into on the right column and click "Insert". Or
if you are replacing existing sounds, use "Overwrite".
7.
When complete, click on the "Update Caller" button to save your changes. Any sounds being
removed will automatically be backed-up.
8.
Exit the utility and update your remote control as per the instructions in the next section.

6-3 Transferring a New Playlist to the TX35

Now that you are done programming your Cabela's SL
playlist to the TX35 transmitter. You will need to obtain a 3.5mm male-to-male stereo patch cable for this
process.
1.
Disconnect all accessories from the Cabela's SL
2.
Turn off the power for both the game call and the TX35.
3.
Connect the 3.5mm patch cable from the sound upload jack on the TX35 to the AUX jack on the
game call.
4.
Turn on the TX35.
5.
After powering on, the TX35 will display "TURN ON CALLER".
6.
Turn on the game call.
7.
The TX35 will display "TRANSFERRING DATA" as transfer occurs. When it's done, the TX35 will
display, "REMOVE CABLE HOLD SEND".
8.
Unplug the cable from the TX35 first, followed by the main unit. Push and hold the power/send
button on the TX35 for 2-3 seconds. The screen should briefly display "TRANSFER COMPLETE"
and then your sound list will appear on the screen. Cycle through the list to view your changes.
10
P
Game Call to your PC. The USB port is located inside the battery
P
Game Call.
P
Game Call to the PC.
P
Game Call, you are ready to download the new
P
Game Call (i.e. speakers or decoy).