Foxpro Cabela's SLP Predator Call Instruction Manual - Page 5

Browse online or download pdf Instruction Manual for Hunting Equipment Foxpro Cabela's SLP Predator Call. Foxpro Cabela's SLP Predator Call 12 pages. Predator caller

Print Page
Installing Batteries in the Cabela's SL
1.
Access the battery compartment by removing the FOXJACK 4 from the back of the game call. The
FOXJACK 4 is secured in place by a thumbscrew. Turn the thumbscrew counterclockwise until it
can be removed.
2.
The FOXJACK 4 is connected to a wiring harness inside the battery compartment. You can
disconnect the wire from the FOXJACK 4 while installing batteries.
3.
With the FOXJACK 4 removed, locate the battery holder. The holder fits 8 AA batteries and is
double-sided, providing 4 battery cavities on each side. The tray is connected to a power wire.
You may unplug the power wire to fully remove the tray from the game call while installing
batteries.
4.
Place the 8 AA batteries into each battery cavity while observing polarity as indicated.
5.
Reconnect the power cable to the tray and slide tray back into the game call.
6.
Reconnect the FOXJACK 4 to the wiring harness.
7.
Position the FOXJACK 4 back in place and then tighten the thumbscrew to secure it.

1-4 TX35 Remote: First Glance

1-5 TX35 Remote: Requirements

The TX35 remote control operates on a single 9V DC battery. It is recommended that you use a high-quality
alkaline battery.
Installing the 9VDC Battery in the TX35 Remote
1.
Access the battery compartment by removing the door from the back of the TX35 remote. The
door slides down and off of the housing.
2.
Attach the 9V DC battery to the power wire in the back of the remote. The battery only connects
one way. Make sure that the terminals from the battery wire are properly connected to the
terminals on the battery.
P
Game Call:
ITEM
1
2
3
4
5
6
7
DESCRIPTION
Graphic display
Send/power
Sound up and down
Auxiliary
Lanyard loop
Volume up and down
Mute
5