Foxpro Scorpion X1-C Instruction Manual - Page 12

Browse online or download pdf Instruction Manual for Hunting Equipment Foxpro Scorpion X1-C. Foxpro Scorpion X1-C 19 pages. Hunting game call wireless

Print Page

IMPORTANT NOTE

NOTE: When you activate FOXBANG it will automatically use the previous

sensitivity setting. The factory default sensitivity is medium. You may need to

adjust this in order to get the right setting for your firearm. If you are using a large

caliber (.30-06), you would want to select a lower sensitivity. If using a smaller

firearm (such as .17HMR or .22), use the higher sensitivity. Medium settings should

be suitable for .17 Fireball, .223, .22-250, etc.

Selecting FOXBANG Sensitivity

Press and hold Sound Up and Down on the TX-9 for 3 seconds.

Use the Volume Up and Down buttons to select your desired sensitivity.

Press the Send button to lock this setting in.

IMPORTANT NOTE

NOTE: An unintended and unavoidable consequence of adjusting the FOXBANG

sensitivity to high levels is that handling noises, such as banging of the transmitter

case on your firearm stock, may cause unexpected activation of FOXBANG. For this

reason, you should choose the lowest sensitivity that affords reliable activation

from the muzzle blast. FOXBANG is intended to work when the transmitter is

located within about 5 feet of the firearm muzzle.

5-4

Reverse Text Mode

For nighttime operation, there may be times where reversing the screen graphics can be to your

advantage. To accomplish this, simultaneously press the P1 and P2 buttons on your TX-9. To

switch back to normal, simply repeat the process.

5-5

Large Text Mode

If you have trouble reading the text on the screen, you can engage large text mode on the TX-9.

This will display the 3 digit sound ID number along with the 2 digit volume level in large text

only (nothing else will be displayed). To engage this, press Volume Up and Volume Down

simultaneously. To switch back to normal text mode, reverse this process.

6. Programming the Scorpion X1C

Programming your Scorpion X1C can be done from home with the use of a PC or Mac computer,

or by sending the Scorpion X1C to the factory. In order to program the Scorpion X1C from home

you will need the following items:

Micro SD card reader/writer (not included).

3.5mm stereo audio cable (not included).