DSE DSEGenset Series Installation Instructions Manual - Page 3

Browse online or download pdf Installation Instructions Manual for Controller DSE DSEGenset Series. DSE DSEGenset Series 6 pages.

Print Page

Section

Parameter As Shown On Display

Mains Under Pos Seq Volt

Mains Over Neg Seq Volt

Mains Asymmetry High

Timers

LCD Page Delay

LCD Scroll Delay

Engine Pre Heat Timer

Engine Post Heat Timer

Engine Cranking

Engine Cranking Rest

Engine Safety On Delay

Engine Smoke Limiting

Engine Smoke Limiting Off

Engine Warming

Engine Cooling

Engine Overspeed Overshoot

Engine Fail To Stop Delay

Battery Under Voltage Warning Delay

Battery Over Voltage Warning Delay

Return Delay

Generator Transient Delay

Mains Transient Delay

Mains Transfer Time

Mains Over Zero Seq Volt Delay

Mains Under Pos Seq Volt Delay

Mains Over Neg Seq Volts Delay

Mains Asymmetry High Delay

Gen Over Zero Seq Volt Delay

Gen Under Pos Seq Volt Delay

Gen Over Neg Seq Volts Delay

Gen Asymmetry High Delay

Schedule

Schedule Bank 1 Period

Island / Parallel / Off Load / Auto Start Inhibit,

Week, Start Time, Run Time and Day. Selection

(1 to 8)

Schedule Bank 2 Period

Island / Parallel / Off Load / Auto Start Inhibit,

Week, Start Time, Run Time and Day. Selection

(1 to 8)

Values

Active / Inactive

0 V

Active / Inactive

0 V

Active / Inactive

0 V

0 h 0 m 0 s

0 m 0 s

0 h 0 m 0 s

0 m 0 s

0 h 0 m 0 s

0 s

0.0 s

Active / Inactive

Weekly / Monthly,

Press the Tick

button to begin editing

then up or down when selecting the different

parameters.

Weekly / Monthly,

Press the Tick

button to begin editing

then up or down when selecting the different

parameters.

ACCESSING THE 'RUNNING' CONFIGURATION EDITOR

•

The 'Running' Configuration Editor is accessible without stopping the engine. All protections remain active whilst

using the ''Running' Configuration Editor.

•

Press the Next Page

button to access the Main Menu page.

•

Press the Previous Page

button followed by either the Scroll

buttons to locate the 'Running' Configuration Editor.

Next Page or Previous Page

RUNNING CONFIGURATION EDITOR PARAMETERS

Section

Parameter As Shown On Display

Display

Contrast

Units Pressure

)

Units Temperature

Units Volume

Language

Synchronising Commissioning Screen

Override Starting Alarms

Voltage Adjust

(Manual Mode Only With Gen Open)

Frequency Adjust

(Manual Mode Only With Gen Open)

Load Control

Injection Port

Mains Decoupling Test Mode

Power Control Mode

Load Parallel Power

Load Parallel kVArs

Load Parallel PF

Governor Droop Offset

Governor Ramp Rate

AVR Droop Offset

AVR Ramp Rate

Load Priority

buttons or the

Values

75 %

kPa, bar, psi

°C, ° F

Litres. Imp gal. Us gal

English, Other

Active / Inactive

Constant Power / Frequency-Power / Voltage-

Power

0 %

0.00 pf

1-64