DSE DK-HT2 Owner's Manual

Browse online or download pdf Owner's Manual for Digital Camera DSE DK-HT2. DSE DK-HT2 3 pages. Camera with battery camouflage vcr

Print Page

OWNER'S MANUAL

DK-HT2

Camera with battery camouflage VCR

Product description

DK-HT2 is a camera with a video recorder on an SD card in a watertight container and mimetic

developed for outdoor surveillance. It includes a microphone for recording sound.

And 'it powered by AA batteries and SD card recording to internal memory. The batteries and SD

card are not included. Thanks to its infrared sensor, the camera remains in stand-by for a long

time by consuming very little battery and starts recording only in the presence of movements.

The camera has an infrared illuminator with invisible LED that allows viewing in the dark up to

about 30 meters.

Inserting batteries

DK-HT1 works with normal AA batteries, both

normal and rechargeable. They can put 4 or 8

depending on autonomy

that

It requires. With 8 batteries the camera has a

range of about 7 months in stand-by.

Insert the SD Card

The first thing to do is to insert the micro SD card into

this slot in DVR. To access the SD card compartment

is necessary to open the front cover. Caution

sense

to the

inserting the SD card that will slide into place only

with the gold contacts facing upward, as shown in the figure.

The package does not include an SD card, or the SD card reader for your computer that you must

purchase separately.

E 'can use any micro SD card with a capacity of 4 to 64 GB CLASS 10 or higher. An SD card

class 10 has a 10 MB / s write speed. Do not use the SD card with a lower rate because it could

lead to malfunction.

registration

The camera records audio and video in VGA resolution adjustable, 720P or 1080P (Full HD) with

H264 compression. You can use any SD card (or micro SD card with adapter) with a maximum

capacity of 64GB. One minute of footage in Full HD 1080 takes up about 80MB. A

Yes

DSE srl - Digital Surveillance Equipment - www.dse.eu

DK-HT2 - camouflage camera for the campaign

32GB SD card can hold up to 6 hours of video, a 64GB over 12 hours. The camera also records

audio.

Motion detection with infrared sensor PIR

The camera records in motion detection, namely registers only in the presence of living beings in

front of it. The word living beings, is not accidental because this camera does not use, like most

of our other systems, changing pixels to detect the intruder but an infrared sensor such as those

used in alarm systems. This does not detect the movement of objects such as bushes or

branches and consuming very little on standby can wait for months intrusion. The apparatus

records

programmable from 1 to 120 seconds.

Configuration

The camera is controlled with the keyboard and internal monitor.

First, you notice that the device has two power buttons: TEST / OFF and ON

TEST / OFF - Press this button will launch the device in test mode. And 'the mode that is used to

position the camera and set the functions. In this test mode, you can also record still images with

manual controls. Pressing this button for 3 seconds to turn off the camera.

ON - briefly pressing this button will start the normal surveillance functionality of the camera that

allows you to record in accordance with the detections of the front sensor.

in test mode settings

First you should start the unit in test mode to set operating options as needed and to position the

camera. Press the red button TEST. The DVR will beep and will start up the on-screen setup

menu.

Document: DK-HT2-1M7

Page: 1

file

Video of the length