DSE SD-5 Series User Manual - Page 14
Browse online or download pdf User Manual for Digital Camera DSE SD-5 Series. DSE SD-5 Series 15 pages.
Print Page
USER MANUAL
SPEED DOME CAMERAS SD-xxx-5
Page:14
CAMERA MODULE OSD MENU
Access to the OSD menu of
the camera module only
There is a camera module configuration menu that
allows you to adjust some advanced video parameters.
It is not necessary to use this menu in most
applications.
To access you need:
Call up system PRESET 102 twice
ATTENTION - This call works only with RS485 protocol
and cannot be used with UTC control on video cables.
HOW TO OPERATE
To move within the OSD menu of the camera module
only, do not use the joystick between the v or the
navigation arrows. Move with ZOOM + / ZOOM - and
modify the values of the individual items with FOCUS +
/ FOCUS -
The ENTER key is obtained by recalling preset 102
twice. Preset 102 must be recalled twice in each item
where the ENTER symbol is present
GENERAL MENU
The initial menu of the camera module allows you to
set directly
-
AHD CVI TVI CVBS video signal
-
Zoom value overlay (ON / OFF)
-
Focus (Manual / Automatic)
It is also possible to go to BOX ADJUST and MAIN
MENU and access these submenus by calling preset 102
twice.
BOX ADJUST
It is possible to go to BOX ADJUST and call preset 102
twice to access. These are internal camera functions
that are not recommended to be changed.
MAIN MENU
It is possible to go to MAIN MENU and call preset 102
twice to access. You can control different camera
settings.
To exit the camera menu, go to SAVE & END and call
preset 102 again twice to exit.
LENS- in this section it is necessary to indicate to
the camera which type of lens you are using so that it
can control it correctly
MANUAL: fixed aperture lens. The camera will
use the electronic iris.
DC: DC drive autoiris lens.
EXPOSURE- in this section you can set the
operation of the electronic diaphragm.
SHUTTER: Sets the operation of the electronic
iris. It is possible to choose AUTOMATIC (AUTO)
and FLK modes whichis the compensation of
images that contain small variations invisible to
the human eye (neon light, PC screen, TV)
BRIGHTNESS: Adjusts the brightness of the
image.
AGC: Adjusts the gain of the image.
DWDR: Wide Dynamic Range Digital - used for
shooting areas with different brightness levels.
This function allows you to make the dark area
visible and the bright one at the same time.
BACKLIGHT: Used for shooting backlit subjects
against a bright background
WHITE BAL- in this section there are the options
for white balance, an important function to make the
image always white in any type of lighting. The options
are available: ATW (Automatic), AWCSET (manual).
As a rule, the ATW setting is always recommended as
the white balance is automatically adjusted as the type
of lighting changes. In the MANUAL option you can
adjust
the
white
particular lighting conditions.
DAY & NIGHT -allows you to adjust the way in
which the switching from color to B / W for night vision
takes place. It is possible to set the camera to provide
images always in color (COLOR), always in B / W (B /
W) or to switch automatically from color to B / W based
on the light (AUTO).
ADJUST -in this section the following parameters
are set:
WWW.DSE.EU
tone
manually
for
shooting
in