DSE G1680 Instruction Manual - Page 10

Browse online or download pdf Instruction Manual for DVR DSE G1680. DSE G1680 17 pages.

Print Page
Recording cassettes
If you want to use the video's timer to record a programme, the clock, date and stations must be set
correctly.
Load a cassette with its safety tab in place (see page 23) and with enough free tape for the recording.
One-touch recording-OTR
Press PR+ or PR- to choose the station you want to record.
VCR
Every time you press
, the recording time will increase by 30 minutes. It is
possible to record for up to 10 hours if there is enough room on the cassette.
• To cancel OTR press and hold the STOP button for about five seconds until the video
stops recording.
• If you want to record from other equipment that is connected to your video, see page 5.
18
For timer recordings, clock, date, and stations must be set correctly.
Load a cassette with its safety tab in place (see page 23) and with enough free tape for the recording.

Normal timer recording

HOW OFTEN DO YOU WANT
TO RECORD THIS PROGRAM?
1
ONCE
WEEKLY(ONCE A WEEK)
DAILY(MON-FRI)
DAILY(MON-SAT)
DAILY(MON-SUN)
PR+/-:SELECT
OK:CONFIRM
TIMER PROGRAM (ONCE)
PR
2
START TIME
END TIME
START DATE
TAPE SPEED
PR+/-:SELECT (AV)
0-9 :SETUP(PR)
/
:CORRECT
These buttons are used
TIMER PROGRAM (ONCE)
on the following two
PR
START TIME
pages.
3
END TIME
START DATE
TAPE SPEED
PR+/-:SELECT (AV)
0-9 : SETUP (PR)
/
:CORRECT
OK:CONFIRM
Press MENU.
Choose "Timer Program" by
pressing OK.
There are positions for eight timer
programs.
Press PR+ or PR- to select an
unused program, for example '- - - -'
MENU:END
then press OK to confirm.
Press PR+ or PR- to select how
often you want to make the
recording, for example, once, weekly
and so on. Press OK to confirm.
PR : Use PR+ if you want to choose
the AV channel or 0 to 9 for other
channels.
--
--:--
Start time : Use buttons 0 to 9 to
--:--
enter the start time.
--/--
SP
End time : Use buttons 0 to 9 to enter
the end time.
MENU:END
Start date : Use buttons 0 to 9 to
enter the date.
Tape Speed : Use PR+ if you want to
choose LP (see page 17).
If you want to change any of the
01
details. Move to the details you
18:10
20:30
want to change using the
12/11(FRI)
buttons.
LP
Change the setting using the PR+ or
PR- or number buttons 0 to 9.
MENU:END
and
19