DSE G1680 Instruction Manual - Page 4

Browse online or download pdf Instruction Manual for DVR DSE G1680. DSE G1680 17 pages.

Print Page

Tuning to the TV

Once you have carried out the steps in 'Setting up your video' (diagram 1 on page 2), switch on your TV.

If you have connected your video through the RCA connection (diagram 2 on page 3), go to step 2.

If you have connected it through RF cable (as shown in diagram 1 on page 2)

Select a free channel on your TV and manual tune the channel until the blue screen as shown in step

2 appears. Refer to the TV manual for more details.

LANGUAGE SET

Select the wanted language and country with PR+ or PR-

ENGLISH

DEUTSCH

button. Press OK to confirm.

ITALIANO

ESPAÑOL

FRANÇAIS

NEDERLANDS

SVENSKA

SUOMI

PR+/-:SELECT

OK:CONFIRM

MENU:END

COUNTRY SET

Press OK to confirm.

Australia

New Zealand

Unless you are living in an area with poor reception, ' Auto

Search' tunes in all the stations you can receive in your country

and sorts them in a common order, for example, P-01 on

PR+/-:SELECT

OK:CONFIRM

MENU:END

programme 1, P-02 on programme 2 and so on.

See page 10 and page 11 if you need to change any of the

automatic settings. You should finish the auto search before you

CH 25

go to page 10 or page 11.

PLEASE WAIT...

In case of the auto search is not able to receive some CH's, you

can receive the CH using the manual tuning. (see on page 9)

MENU:END

If the clock has not been set, the clock setting screen will

CLOCK SET

appear.

TIME - - : - -

Please see " Setting time and date" on page 8.

DATE - -/- -/- - - -

0-9:SETUP(HOUR)

:CORRECT MENU:END

If you want to change the station names, see page 10.

MANUAL SET

If you want to change the programme locations see page 11.

PR01 P-01

PR08 P-08

PR02 P-02

PR09 P-09

You need to change programme locations if the stations are

PR03 P-03

PR10 P-10

PR04 P-04

PR11 P-11

not in order, for example, P-01 on programme 1, P-02 on

PR05 P-05

PR12 P-12

programme 2 and so on.

PR06 P-06

PR13 P-13

PR07 P-07

PR14 ----

Press MENU to end.

PR+/-:SELECT

OK:CONFIRM

MENU:END

Press

on the remote control and RF36 will be

displayed on the front of your video.

What to do if you get picture interference when using RF lead

The RF output can be adjusted from 27 to 69, this video is defaulted to RF36. If other

broadcasts are close to RF36 they may cause picture interference, you can change the RF

output until your television has a noise-free channel for your video.

If other stations are positioned on or near the current RF OUTPUT CH, the following guide message

appears automatically.

RF OUTPUT SET

IMPORTANT!

CURRENT

CH 36

PLEASE CHANGE THE TV

RECOMMENDED

CH 38

CH TO 38.

OK:CONFIRM

MENU:END

Change the RF output from 36 using the remote control.

RF OUTPUT SET

Press MENU. Select 'VCR Set Up' by pressing PR- twice then OK.

Select 'RF Output Set Up' by pressing PR- twice then OK.

Change the channel number using buttons 0-9.

0-9:SET UP (27-69)

Press OK to confirm. Press MENU to end.

OK:CONFIRM

MENU:END

If there is still picture interference repeat option2.

Buy a RCA cable from your local electrical shop. Connect the RCA cable as shown on page

3, diagram 2.

If you want to change the RF output in the future due to new broadcasting stations or equipment and so on,

press and hold the OK button on the remote control until RF 36 is displayed on the front of the video. Then go

to option 2 above.

Option 1

Press OK to confirm.

Press MENU to end.

Option 2

Option 3