DSG SH2500 Administrator Operation Manual - Page 8

Browse online or download pdf Administrator Operation Manual for Switch DSG SH2500. DSG SH2500 13 pages. Dsg sh2500 intelligent switch

Print Page

Port Configuration

You can set the speed, duplex and priority of a specific port in this section.
1.
Select Port Config item.
2.
Select a specific port to be configured from "Port Number" list, edit the settings.
Auto Negotiation, Advertise 10M Half, Advertise 10M Full, Advertise 100M Half, Advertise
100M Full – When "Auto Negotiation" is enabled, you can edit the advertise speed of the port.
Notice that if you set all advertise speeds as off, you will disable that specific port.
Speed, Duplex – When "Auto Negotiation" is disabled, you can edit the speed and duplex of
the port.
TOS over VLAN priority – When enabled, TOS will be superior to VLAN tag. That means
packets with TOS tags will have the priority pass than packets with VLAN tags. When disabled,
VLAN tag will have priority than TOS. To set TOS or VLAN tag queue, please refer to
"VLAN/TOS priority" setting item.
Port-based Priority, Port Priority Mapping – When enabled, packets transmitted/received on
the port will have the priority than TOS or VLAN tag. You can then set the queue to be high or
low.
3.
When finished, click the Apply button.
Note: The priorities the Swith provides include TOS, VLAN tag and Port-based. The sequence is
Port-based, TOS and VLAN tag if all are enabled by accident.
8