28 GORILLA 28-0010366 User Manual - Page 2
Browse online or download pdf User Manual for Battery Charger 28 GORILLA 28-0010366. 28 GORILLA 28-0010366 4 pages. Wireless charging station
Print Page6. This transmitter is designed to specifically used for AE Wireless Temperature Sensor, model: 28-
0010038.
2. User Operation
The charger does not contain a power switch. Simply connect the USB-C cable end to the Charger and the
USB-Type A cable end to the wall adapter power supply. When not charging, the charger is in standby
mode.
In order to charge a receiver, place the receiver equipment in the keyed slot on top of the charger in the
appropriate orientation. The receiver equipment keyed slot should be face down towards the outer edge of
the charger case. When the receiver equipment is placed correctly the top surface of the receiver
equipment should be parallel with the surface of the charger. Once the receiver equipment is placed in the
charger, the charger should commence charging within a few seconds. Consult the equipment's user
manual for the time duration and procedures for charging.
3. Radio Characteristics:
The WPT transmitter nominal frequency is: 917.5MHz
The WPT transmitter conducted average output power is: 29 dBm total
The BLE transmitter operating frequency: 2402 – 2480MHz
The BLE transmitter output power: -2.4dBm
4. USB-C Port
Insert the designated USB-C end of the cable into the USB-C port of the charger. Also, place the type A
USB end of the cable to the type A USB port of the electrical AC wall power supply. This will supply
power to the charger used to charge the receiver equipment.
5. Packaging contents
WPT Charging Station
AC Wall Power Supply
USB-C to USB Type A Charger cable
User Manual and User Information
User Manual and User Information.