ATSC AT2016 User Manual - Page 17

Browse online or download pdf User Manual for TV Converter Box ATSC AT2016. ATSC AT2016 20 pages.

Print Page

3. Troubleshooting

Q: It takes a while to display picture on the screen after turning power on

or after changing channel.

A: It will take several seconds for this receiver to show the logo or picture after

power on sincee the system have to finished the initialization of the main chip

and demodulator. In case of digital broadcasting, it could take 1 to 2 seconds

to receive data. Therefore, it is not a faulty receiver if the picture display is

delayed.

Q: There is no picture on the screen.

A: Make sure the power is on.

Make sure the cable between the receiver and the TV is connected properly.

Make sure the TV's external video input mode is selected correctly.

Make sure the video output is selected correctly.

Make sure the antenna is positioned correctly.

Try turning the receiver off and then back on again.

Q: Poor video quality or screen flickering.

A. This is a result of a poor broadcast signal.

Rotate the antenna to a different direction.

Q: No Sound.

A: Make sure the cable between the receiver and the TV audio jack or your

audio system is connected properly.

Try pressing the MUTE button on the remote.

Try pressing the VOL+ button on the remote continuously.

Try turning the receiver off and then back on again.

Q: The remote control does not work.

A: Make sure there is no obstruction between the remote controller and the

remote sensor of the receiver.

Make sure the distance and degree is not out of range.

Check to insure the batteries are installed correctly.

Install a pair of new batteries.