ATsens AT-Patch User Manual - Page 4
Browse online or download pdf User Manual for Personal Care Products ATsens AT-Patch. ATsens AT-Patch 14 pages.
Also for ATsens AT-Patch: Quick Manual (2 pages), Quick Manual (6 pages), User Manual (14 pages)
Print Page
Attaching the Sub Patch
7
Put the Sub Patch on top of the attached device in the correct direction.
After attaching the Sub Patch, press firmly on the entire surface of the
device for at least
correctly at once. Reattachment can not be possible.
Removing protective tape
8
After attaching the Sub Patch, detach the protective tape from the base
film slowly.
Checking the attachment of the device
9
Check if the device and the Sub Patch are attached well without loose
areas. If there are unattached areas on the skin, press the base film
with finger smoothly to be attached well.
6
02
How to use the device
1 minute
to improve adhesion. Attach Sub Patch
Additional Information
Connect to App to record ECG signal
1. Bluetooth & Location service
Check if the Bluetooth and location service functions are activated
to connect the device.
Bluetooth
&
Location
2. Connecting with the smartphone App (AT-Note)
After attaching the device, connect the device with the smartphone
App (AT-Note) to check the ECG signal.
recording ECG signal.
Turning off the power
Once the initial connection is checked, device is not
terminated for the duration of use.
- It is impossible to physically turn it off. After the operation time,
the button color turns red and the power turns off automatically
after 3 beeps.
* ATP-C130 : 14 days
- The working status of the device can only be checked through the
App's real-time live Viewer.
02
How to use the device
Must check the start of
7