DSP ULE Starter Kit User Manual - Page 9
Browse online or download pdf User Manual for Computer Hardware DSP ULE Starter Kit. DSP ULE Starter Kit 17 pages.
Print PageULE Starter Kit User's Manual
3. Getting the ULE Controller Up and Running
After connecting the ULE Controller (= DCX81 CMBS UART) as depicted in a previous section (and
confirming via your Device Manager that a new COM port is up and running!), you should run the
DSPG Test Application executable you have downloaded. The window below will pop up and you
should enter the appropriate value:
A Graphical User Interface will pop up as below and the log window should indicate that the
initialization was successfully completed ("CMBS Init Done!).
The log window shown above is an abbreviated version of the incoming/outgoing flow of information
at the CMBS UART Interface. A more detailed (message) log is recorded in a file that can be opened
from the button indicated above. This file is located in the same directory as the DSPG Test
Application.exe file.
Click on the "Open HAN Window" button in the lower right and note that a "Smoke" device is
registered to your Controller, as shown below. This is because the EVB ULE Node in your Starter Kit
has already been registered to the ULE Controller and has been programmed as a Smoke device. A bit
later you will delete this registration and can run through the pairing (=registration) exercise yourself!
Rev1.0
June 2015
9