DSPeaker Anti-Mode X2 User Manual - Page 11

Browse online or download pdf User Manual for Network Hardware DSPeaker Anti-Mode X2. DSPeaker Anti-Mode X2 12 pages.

Print Page

4.Firmware update

The firmware of Anti-Mode

Download the firmware file ( FIRMWARE.X2 ) and copy it to the USB memory stick into its root

•

directory. Make sure the USB memory is using the FAT filesystem format. Some sticks are

formatted with the exFAT filesystem, which is not supported.

Put the Anti-Mode X2 unit to standby with

•

Attach the USB stick to the "SERVICE" USB port on the rear panel of the X2.

•

Turn on the Anti-Mode X2 with

•

Alternatively, switch off and then on by disconnecting and connecting the power plug.

Do not remove the USB stick during the update process. After finishing installation the system

•

reboots, and the home screen is displayed. Now the USB stick can be removed.

The firmware is not updated if the unit already contains the same version of the firmware. In this case,

after checking the contents of the USB stick the unit will start normally.

If you encounter any problems during the update, make sure the USB stick is properly connected and

contains the firmware file. If the problem persists, try copying the firmware file again on a different USB

memory stick. Make sure the USB memory is using the FAT filesystem format.

Some USB memory sticks may not be compatible with the firmware update.

Rev. 1.1

X2 is updated using a USB memory stick.

and wait until the system automatically installs the firmware.

VLSI Solution / DSPeaker

Hermiankatu 8

FIN-33720 Tampere

Website:

http://www.dspeaker.com/

Technical Support:

Sales Support:

2022-08-10

FINLAND

-M

NTI

ODE

SER

UIDE

Page 11 (12)