Attache PID-100 User Manual - Page 3

Browse online or download pdf User Manual for Scanner Attache PID-100. Attache PID-100 7 pages. For notebook computers

Print Page

Attaché User's Manual

Trademarks

IBM, PC and VGA are registered trademarks of International Business

Machines Corporation.

MMX is a registered trademark of Intel Corporation.

MS-DOS, Windows, Windows 95, Windows 98, Windows NT and

Microsoft are registered trademarks of Microsoft Corporation.

All other trademarks are the properties of their respective owners.

Contents

- Installation and Calibration

- Pre-defined Setting

- Custom Setting

- Information Window

Installation and Calibration

1. Insert the CD>select CD device>run Setup.

2. Follow the installation instructions.

3. Connect the Attaché with the PCMCIA interface card.

4. Insert the card into the PCMCIA slot on your notebook or PCMCIA

device on your desktop computer. (such as Antec Datachute)

5. Run PageManager or other applications which are TWAIN compliant.

Your Windows98 has a built in program "Imaging" which is TWAIN

compliant. Go[Start]>[Programs]>[Accessories]>[Imaging] to run the

program.

6. Use the pull-down menu from [File]>Click [Select Source] and select

[Antec] as the device source.

7. Click [Acquire] to enable Attaché. A window with the title "Pre-defined

Setting" will appear on your screen with the "Calibration Page" window

on top of it.

8. Insert the calibration sheet into the Attaché as instructed to set up the

calibration data. This is for the first time on your computer. To make

sure you can always get the best image, this "Calibration Page" will

appear periodically to remind you to calibrate your computer. You can

always click on "Custom Setting" button to enter the setting window

and click on "Calibrate" button to set up the calibration at any time

you want.

Note: Insert the paper to the side with arrow marks on the Attaché.